HP 1652B Getting Started Manual page 391

Hide thumbs Also See for 1652B:

Table of Contents

2. With Waveform on, the channel

signal will be displayed in the

waveform display. Select Waveform off. Channel 1 signal is now

gone, and the channel label has changed to -off-. See figure

lute-tieasure

3. To turn channel 1 waveform back on, select the channel label

field, then select Waveform on.

Insert/Delete

When a signal is inserted into the waveform display, its label field and

waveform will always be displayed directly below the highlighted label

and corresponding waveform.

Select CH 1 label field, then select Insert waveform. A channel

mode pop-up will appear. See figure

Front-Panel Reference

Channel Menu

Chapters

Table of Contents