HP 1652B Getting Started Manual page 242

.-
How the statistics will be updated depends on the state trace mode
(repetitive or single).
In repetitive, statistics will be updated each time a valid run occurs
until you press STOP. When you press RUN after STOP, the statistics
will be cleared and will restart from zero.
In single, each time you press RUN an additional valid run will be
added to the data and the statistics will be updated. This will continue
unless you change the placement of the X and 0 markers between runs.
Pattern
You use the Pattern
Fiz
markers for each 1abel.r
field to specify the patterns for the X and 0
I $j +oooo
+ooo 1 8930 8932 BOX OOFF 1 I .24 .24 us us
+mO2
EEEI
+QoO4
+0005
+0006
+0007
Moo8
woo9
+oOlO
+oOll
8934
67F8 I .26 us
6936 BO3c 1 .24 us
892E 61FA
1.72 us
8930 BOX I .28 us
04F4 0000 1 .96 us
04F6 8930 I .52 us
892R
4EFCI I .24 us
B92C FF9A
I .24 us
WC6 6lE6
1.76 US
88138 80X
I .24 us
Figure 1 l-8.
Pattern
Field Pop-Up Menu
When x-pattern is specified in the
Find
from
field, the pop-ups
in the Pattern
field allow you to specify a paTem for the X
marker in each label.
When the O-pattern is specified, the pop-ups in the Pattern
field allow you to specify the patterns for the 0 marker in each label.
HP 1652B/l653B
State Listing Menu
Front-Panel Reference
11-7