Purge - HP 1652B Getting Started Manual

To start the rename operation, select Execute. The file will be renamed
and relocated alphabetically in the file list in the bottom section of the
Disk Operations menu.
If you try to rename a file with a name that already exists, a message
will tell you that a file already exists with that name, and the file will not
be renamed.
Figure HO. Rename Operation
Purge The Purge operation allows you to delete a file from a disk. When you
select this option, the display will look similar to that shown below.
The file field contains the name of the file to be purged. You can
change the file in this field either by positioning the cursor on the field
and selecting it to access an Alpha Entry pop-up menu, or by using the
up/down ROLL key and the KNOB to move among the files.
When you select Execute you will see a pop-up with the choices
Cancel and Continue. Cancel lets you stop the Purge operation and
returns you to the Disk Operations menu. Continue purges the file
whose name appears in the file field.
Note
ml 4
A
purged file cannot be recovered. Make sure the file that is being
purged is the correct one.
Figure
5-l 1.
Purge Operation
I/O Menu
5-10
HP 16528/16538
Front-Panel Reference