HP 1652B Getting Started Manual page 209

Symbol View Size
The Symbol view
size
field lets you specify how many characters of the
symbol name wiIl be displayed when the symbol is referenced in the
State Trace Specification menu and the State Listing menu. Selecting
this field gives you the following pop-up.
Figure S-17. Symbol View Size Pop-Up Menu
You can have the logic analyzer display from 3 to all 16 of the
characters in the symbol name. For more information see "State Trace
Specification Menu" and "State Listing Menu" later in this chapter.
Symbol Name
When you first access the Symbol Table, there are no symbols
specified. The symbol name field reads "New Symbol." If you select this
field, you will see an Alpha Entry pop-up menu on the display. Use the
pop-up menu and the keypad on the front panel to enter the name of
your symbol. A maximum of
16
characters can be used in a symbol
name.
HP 1652Bl1653B
State Format Specification Menu
Front-Panel Reference
9-15
When you select the Done field in the Alpha Entry pop-up menu the
name that appears in the symbol name field is assigned and two more
fields appear in the display.
tlMHIME
1 - Slplbol Table
Label 1-1
Base IHexadecimal ]
IRERD
llPatternj100001
(TiK)
Symbol
vieu size El
Figure
B-18.
Symbol Defined as a Pattern