Table of Contents
Advertisement
Using the External
State Analyzer
Selecting the Clock
Source
4-14 Using the External Analyzer
When you select the "external state analyzer" mode, the external
analyzer operates as an independent state analyzer. You use the
independent state analyzer in the same way as you use the internal
analyzer, except that you must select the external analyzer clock source
and specify the maximum qualified clock speed. Both of these
specifications are made in the external analysis format screen (see
figure 4-8) which you access by selecting:
Analysis, Format, External
Figure 4-8. Analysis Format Display
The independent state analyzer may be clocked with target system
clock signals connected to the JCL and KCL external clock inputs.
Notice that there are two "Clock on" fields (see figure 4-8), one for the
J signal and one for the K signal. Position the cursor in one of these
Advertisement
Table of Contents
