Degaussing The Display; Operating Environment; Storage And Shipment; Tagging For Service - HP 1652B Getting Started Manual

Degaussing the
If the instrument has been subjected to strong magnetic fields, the CRT may
Display -
become magnetized and display data may become distorted. To correct this
condition, it may be necessary to degauss the CRT with a conventional external
television type degaussing coil.
Operating
Environment
The operating environment for the HP
1652B/1653B
is described in section
1
of
this manual. Note the non-condensing humidity limitation. Condensation within
the instrument cabinet can cause poor operation or malfunction. Protection
should be provided against temperature extremes which cause condensation within
the instrument.
The HP 1652B/1653B will operate at all specifications within the temperature and
humidity range given in section 1 of this manual.
Storage and
Shipment
The instrument may be stored or shipped in environments within the following
limits:
Temperature: -40° c to + 75O c.
Humidity: Up to 90% at 65O C.
Altitude: Up to 15,300 meters (50,000 feet).
Tagging for
Service
If the instrument is to be shipped to a Hewlett-Packard office for service or repair,
attach a tag to the instrument identifying the owner, address of the owner,
complete instrument model and serial numbers, and a description of the service
reauired.
Original
Packaging
If the original packaging material is unavailable or unserviceable, materials
identical to those used in factory packaging are available through Hewlett-Packard
offkes. If the instrument is to be shipped to a Hewlett-Packard office for service,
attach a tag identifying the owner, address of the owner, complete instrument
model and serial numbers, and a description of the service required. Mark the
container FRAGILE to ensure careful handling. In any correspondence, refer to
the instrument by model number and full serial number.
HP 1652B/1653B
Service Manual
Installation
2-9