Configuring The Timing Analyzer - HP 1652B Getting Started Manual

Configuring the
Now that you have configured the system, you are ready to configure
Timing Analyzer
the timing analyzer. You will be:
l
Creating two names (labels) for the input signals
l
Assigning the channels connected to the input signals
0 Specifying a trigger condition
1;
Display the Timing Format Specification menu.
a. Press the FORM[AT key on the front panel.
2. Name two labels, one RAS and one CAS.
a. Place the cursor on the top field in the label column and press
SELECT.
b. Place the cursor on Modify label and press SELECT .
[DRAfl TEST ]- Tlmlng Format Speclficetion
Pod 1
I
lTL
I
fictkvity > _____-----------
Label Pal 15 II.I 87 .,., 0
-orr-
-a1f-
+lrr-
-Off-
1
-err-
b -off-
-off-
i -off-
-Gff-
El
I -Gff-
Figure
20-4.
Timing Format Specification Menu
c. With the Alpha Entry pop-up, change the name of the label to
RAS.
Timing Analyzer Measurement Example
20-6
HP 16528/1653B
Front-Panel Reference