Autoscale Field - HP 1652B Getting Started Manual

--
Autoscale Field
The Autoscale field is located in the middle of the top row of fields in
all scope main menus except when the Markers field is set to Statistics.
When the Autoscale field is selected, a pop-up appears allowing you to
cancel or continue the autoscale. See figure
23-18.
[ Scope I- Channel
Input
l7ii-q
Probe
1-J
s/Dlv [1o.oo]
Offset
Preset
Autoscale Pop-ui
HP 1652Btl653B
Front-Panel Reference
Figure 2348. Autoscale Pop-up
If you have inadvertently selected autoscale or wish to abort the
autoscale, select Cancel. If the Continue field is touched, the autoscale
function is started and the advisory Autoscale is in progress is
displayed. The oscilloscope automatically sets V/Div (vertical
sensitivity), channel Offset, s/Div (sweep speed), and trigger Level so
that the input signals are displayed on screen. The oscilloscope checks
all vertical inputs and looks for the trigger on channel
1.
The following
fields are changed when autoscale is complete:
Channel menu
V/Div scaled
Offset scaled
Channel Menu
23-19