Scroll Example - HP 1652B Getting Started Manual

Channel Menu
23-18
This function would normally be used to scroll through a waveform
acquired in Single (single-shot) mode. Scrolling allows you to view the
entire waveform record by adjusting the Delay field.
Scroll Example
Select the s/Div field and turn the knob to set the sweep speed to 200
us/div, then touch the Stop key to stop acquisitions. Select the Delay
field and turn the knob to change delay time to approximately
-1
ms.
As
shown in figure 23-17, you are now looking at the beginning of the
waveform record. You can now scroll through the entire 2k waveform
record, both before and after the trigger point. When used in
conjunction with zooming (see "s/Div Field" paragraph), scrolling is
very useful in displaying single-shot waveforms.
[Scopej- bbvef or=
clu to-heasure
Uarkers
[
Off ] Display [ Normal ] Connect dots[rj
Sample period - 1.000 us
S/DlV
p?KFq Delay 1-1 Grid I]
Figure
23-17.
Scroll Begining of Waveform
HP
16528/16538
Front-Panel Reference