The Load Operation - HP 1652B Getting Started Manual

The Load
Operation
The Load operation allows you to load previously stored configuration
and data from a file on the disk.
Select the Load operation.
-
4 auwLDDo wtolwLflIo
rtstw:
OISamLED
4
DEF RULT
16SO/l,conflg LOhD THIS FILE TO DEFWLT THE LII
HP 16501TR
l6SO/l,conflg ACUJfRE HP1650 CHARACTERS
168000,1
invrr80,srraa
66000 Ih
FOR INTERFhCE
1-O
168020,IP
lnvers~,rrsea
66020 INVERSE
CISSEnBLER
lWO
18036bwO7
lnvarrr,srru
eo386 IA nml 80x87
1-O
IZ80,I lnvrrsr,osrn
200 ZFI FOR INTERFKE
1.0
sEnJP,l 16SO/l,conflg
STATE/lItlING
FORtWiT
SETUP2 lbSO/l,conflg STNE SWlBOLS DEFINED
Figure &8. The Load Operation
Note
,tt 3
The Load operation is type dependent. This means that you cannot
load a system file. For example, if you try to load the file "SYSTEM,"
an advisory "warning: Invalid file type" appears in the top center of the
display.
HP 1652B/l6538
Front-Panel Reference
To load the desired file, press the up/down ROLL key and rotate the
KNOB until the desired file appears in the field to the right of "from
file n .
Another way to enter the name of the file in the field to the right of
"from fde" is to select this field. When the Alpha Entry pop-up appears,
enter the correct filename.
Disk Drive Operations
6-11