HP 1652B Getting Started Manual page 226

If you select the Restart option, you wilI see a qualifier pop-up menu
like that shown in figure 10-2. With the pop-up you select the qualifier
for the pattern on which you want your analyzer to start over.
When your state analyzer is reading data it proceeds through the
sequence. If a term doesn't match the branching qualifier, it is then
checked against Restart. If the term matches, the state analyzer jumps
back the sequence level 1.
Per Level
Selecting the Per level option allows you to define a secondary
branching qualifier for each sequence level. A statement is added in
each level so that you can configure the analyzer to move to a different
level when a specified condition is met. An example of a sequence level
with a secondary branching qualifier is shown in the figure below.
Sequence Level 2
(Done)
Insert Level Delete Level
Whll
Then find
Else on
I
4
c
JI lltime
f ) got0 level
S
cl
4
Figure 1 O-20. Secondary Branching Qualifier
With this configuration, the state analyzer will store b until it finds c. If
it finds f before it finds c, it will branch to sequence level 4. If you have
specified a storage macro in the next to last sequence level the Else on
statement will not appear in that level since a secondary branching
qualifier already exists for that level.
HP 16528/1653B
State Trace Menu
Front-Panel Reference 10-15