Table of Contents
Advertisement
Off disconnects the range from the qualifier specification. In indicates
that the contents of the range are to be in the qualifier specification,
and Out indicates that the complement of the range is to be in the
qualifier specification.
When you have specified your combination qualifier, select Done. The
Full Qualifier Specification pop-up closes and the Boolean expression
for your qualifier appears in the field for which vou specified it.
\
While storing
Cb+c+d+rangel+(#e+gl
Figure W-7. Boolean Expression for Qualifier
Sequence
Levels
There are eight trigger sequence levels available in the state analyzer.
You can add and delete levels so that you have from two to eight levels
at a time.
Only three levels appear in the Sequence Levels display at one time. To
display other levels so that they can be accessed, press the up/down
ROLL key and rotate the KNOB.
If you select level 1 shown in figure 10-1, you will see the following
pop-up menu:
#
Sequence Level
1
(TiK-jT
Insert
Level
Delete
Level
8
1
b
ITrIgger
1 a
11
I
L .
.
Figure 10-8. Sequence Level Pop-Up Menu
State Trace Menu
HP 16528116538
lo-6
Front-Panel Reference
Advertisement
Chapters
Table of Contents
