Using the External Timing Analyzer
Introduction
Note
The external analyzer can be aligned with the internal emulation
analyzer, configured as an external state analyzer, or configured as an
external timing analyzer. This chapter shows you how to use the
external timing analyzer. The main sections in this chapter:
Show you how to configure the external analyzer as a timing
analyzer.
Show you how to specify threshold voltages and define labels
for the external probe signals.
Describe the timing specifications.
Describe the timing waveform display.
Show you examples of using the external timing analyzer.
Two versions of the PC Interface are shipped with your emulator; one
contains interface software for the timing analyzer and the other does
not. The version that contains the timing interface software is larger
and requires most of the PC's 640K bytes of RAM. The version that
does not contain the timing interface software requires approximately
480K bytes of RAM.
Using the External Timing Analyzer 5-1
5