Identifying Interface Numbers In The Cli; Mx104 Router Description; Table 4: Mx104 Mic Interface Names - Juniper MX104 Hardware Manual

Table 4: MX104 MIC Interface Names

Component
Built-in 4-port 10-Gigabit Ethernet MIC
MIC 0 (left) installed in MPC 0 (labeled
MIC 1 (right) installed in MPC 0 (labeled
MIC installed in MIC slot 1/0
MIC installed in MIC slot 1/1

Identifying Interface Numbers in the CLI

Copyright © 2014, Juniper Networks, Inc.
Component Name in the
CLI
4x 10GE XFP
0/0 ) See
Module Reference
)
0/0
In the physical part of the interface name, a hyphen (
the MPC number (represented as an
PIC and port numbers:
type-fpc/pic/port
type—Media type, which identifies the network device. For example:
ge—Gigabit Ethernet interface
so—SONET/SDH interface
xe—10-Gigabit Ethernet interface
For a complete list of media types, see Interface Naming Overview.
fpc—Slot in which the MPC is installed. On the MX104 router, the three MPCs are built
into the chassis and are represented in the CLI as
pic—Logical PIC on the MIC. The number of logical PICs varies depending on the type
of MIC.
port—Port number.
NOTE: The MIC number is not included in the interface name.
The following sample CLI output displays the three built-in MPCs and five MICs.
user@host> show chassis hardware
Interface Names
xe-2/0/0
MX Series Interface type-0/0/port
.
type-0/1/port
type-0/2/port
type-0/3/port
type-1/0/port
type-1/1/port
type-1/2/port
type-1/3/port
in the CLI), and a slash (
FPC
FPC 0
Chapter 1: MX104 Router Description
through xe-2/0/3
- ) separates the media type from
) separates the logical
/
, FPC 1 , or FPC 2 .
7