Terminal Width - Cisco Sx350 Cli Manual

66
User Interface Commands
Default Configuration
The default configuration is prompts enabled.
Command Mode
Privileged EXEC mode
Example
The following example disables the terminal prompts
switchxxxxxx# terminal no prompt

66.18 terminal width

To determine the width of the display for the echo input to CLI sessions, use the
terminal width User EXEC mode command. To return to the default, use terminal no
width.
The command is per session and will not be saved in the configuration database.
Syntax
number-of-characters
terminal width
terminal no width
Parameters
number-of-characters - Specifies the number of characters to be displayed for the
echo output of the CLI commands and the configuration file,'0' means endless
number of characters on a screen line. (Range: 0, 70-512)
Default Configuration
The default number of characters is 77.
Command Mode
Privileged EXEC mode
Example
The following example sets the terminal width to 100 characters
switchxxxxxx# terminal width 100
1251 Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide