Ricoh G147 Service Manual page 228

002 FAX TEL No.
5816 Remote Service
I/F Setting
Turns the remote diagnostics off and on.
[0~2/1]
001
0: Remote diagnostics off.
1: Serial (CSS or NRS) remote diagnostics on.
2: Network remote diagnostics.
CE Call
002
Lets the service technician start or end the remote machine check with CSS or
NRS; to do this, push the center report key
Function Flag
Enables and disables remote diagnosis over the NRS network.
003
[0~1/1]
0: Disables remote diagnosis over the network.
1: Enables remote diagnosis over the network.
SSL Disable
Controls if RCG (Remote Communication Gate) confirmation is done by SSL
during an RCG send for the NRS over a network interface.
007
[0~1/1]
0: Yes. SSL not used.
1: No. SSL used.
RCG Connect Time
008 Sets the length of time (seconds) for the time-out when the RCG (Remote
Communication Gate) connects during a call via the NRS network.
[1~90/1 sec.]
009 RCG Write Timeou
G147
Use this to input the fax number of the CE printed on the
Counter Report (UP mode). Not Used
5-38
RCG Connect Timeout
RCG Write to Timeout
SM