Ricoh G147 Service Manual page 249

Copy SD to SD (Any)
015
This SP copies the log on an SD card (the file that contains the information
written directly from shared memory) to a log specified by key number.
Make HDD LogFile
016
This SP creates a 32 MB file to store a log on the HDD.
Make SD LogFile
017
This SP creates a 4 MB file to store a log on an SD card.
DebugSaveWhen
These SPs select the content of the debugging information to be saved to the
5858
destination selected by SP5857 002.
SP5858 3 stores one SC specified by number. Refer to Section 4 for a list of SC
error codes.
001 EngineSC Error
002 SystemSC Error
003 Any SC Error
004 Jam
5859 Debug Log Save Function
001 Key 1
002 Key 2
003 Key 3
004 Key 4
SM
0:OFF 1:ON
Stores SC codes generated by engine errors.
0:OFF 1:ON
Stores SC codes generated by GW controller errors.
0:OFF 1:ON
[0~65535 / 0 / 1]
0:OFF 1:ON
Stores jam errors.
These SPs allow you to set up to 10 keys for log
files for functions that use common memory on the
controller board.
[-9999999~9999999 / 0 / 1]
5-59 G147