Ricoh G147 Service Manual page 255

Confirms that the mechanical counter inside the inner cover is connected.
Meter Charge
This SP operates a "meter click charge" that maintains a total counter for the
5930
PCU, fusing unit, and other components. When this SP is switched on, the use of
the PCU, for example, is not monitored by the engine but the engine counter
continues to operate.
Finisher Stack
0: OFF, 1: ON
5961
Selects whether or not all stapled copies are sent to Shift Tray 1 when the
Two-Tray finisher is installed.
SP Print Mode
In the SP mode, press Copy Window to move to the copy screen, select the
5990
paper size, then press Start. Select A4/LT (Sideways) or larger to ensure that all
the information prints. Press SP Window to return to the SP mode, select the
desired print, and press Execute.
001 All (Data List)
002 SP (Mode Data Li)
004 Logging Data
005 Diagnostic Repor
006 Non-Default
007 NIB Summary
SP6-xxx: Peripherals
Staple Adj
6105
[–3.5~+3.5 / 0.0 / 0.5 mm step]
SM
Finisher Paper Stack to Shift Tray?
SMC Print
All (Data List)
SP (Mode Data List)
Logging Data
Diagnostic Report
Non-Default (Prints only SPs set to values other than
defaults.)
NIB (Network Interface Board) Summary
Staple Position Adjustment
5-65 G147