Printing The Test Pattern - Ricoh G147 Service Manual

6. Press to display "Test T Pattern"
SP2902
Print T Pattern
7. Press [#Enter].
<Print Pattern>
*0:None
The asterisk (*) shows the current selection.
8. Press to display the name of the pattern that you want to print.
<Print Pattern>
5:Grid Pat. 1
9. Press [#Enter] to mark the selection with an asterisk.
<Print Pattern>
*5:Grid Pat. 1
10. Press [Escape] twice.
<Engine>
2. Drum
The printer is now in the Test Pattern Print mode. To print the pattern, you must do
SP5990.

5.3.2 PRINTING THE TEST PATTERN

Do SP5990 to print the test pattern.
1. After selecting the test pattern selected as described above, press
"5. Mode2.
<Engine>
5. Mode
2. Push [#Enter].
SP5024
mm/inch Display
3. Push once.
G147 5-92
to display
SM