Merging Applications On One Sd Card - Ricoh G147 Service Manual

2. To remove an SD card, push the SD card in carefully to release it, and then
remove it from the slot.
To prevent damage to the SD card or the slot lock, always push the card in to
release it and then remove it.

1.9.3 MERGING APPLICATIONS ON ONE SD CARD

Location of SD Card Slots
The machine has three SD card slots:
C1 is for applications provided on SD cards. If more than one option is to be installed,
the applications must be merged on the same SD card. (see 'Merging Applications').
C3 is used for servicing only. Otherwise this slot should always be empty.
The data necessary for authentication is transferred with the application program to
the target SD card.
Do not use an SD card if it has been used with a computer. Correct operation is not
guaranteed if this type of SD card is used.
The SD card is the only evidence that the customer is licensed to use the
application program. The service technician may occasionally need to check the SD
card and its data to solve problems. SD cards must be stored in a safe location at
the work site.A licensing agreement prohibits copying of the PostScript SD card.
However, you can copy an application from another SD card to the PS SD card.
(This restriction may apply to other SD cards as well.)
G147 1-26 SM