Ricoh G147 Service Manual page 176

Program missing from the SD card
Download the correct program for the machine to the SD card
SD card error 2: SD card removed
The SD card in the boot slot
867 D
when the machine was turned on
was removed while the machine
was on.
SD card error 3: SC card access
868 D
An error occurred while an SD
card was used.
Address book data error
Address book data on the hard
disk was detected as abnormal
when it was accessed from
either the operation panel or the
network. The address book
data cannot be read from the
HDD or SD card where it is
B
870
stored, or the data read from
the media is defective.
More Details
Do SP5846 050 (UCS Settings – Initialize all Directory Info.) to reset
all address book data.
Reset the user information with SP5832 006 (HDD Formatting– User
Information).
Replace the HDDs.
G147
Insert the SD card, then turn the
machine off and on.
SD card not inserted correctly
SD card defective
Controller board defective
If you want to try to reformat the SC
card, use SD Formatter Ver 1.1.
Software defective. Turn the
machine off/on. If this is not the
solution for the problem, then
replace the controller firmware.
HDD defective.
4-26 SM