Input Check - Ricoh G147 Service Manual

5.4 INPUT CHECK

Enter the SP mode and select SP5803.
1. Press together (for 5 seconds), release, then press [#Enter].
System Ver.1.00
1. Service
2. Press .
System Ver. 1.00
2. Engine
3. Press [#Enter].
<Engine>
1. Feed
4. Press to display "5. Mode".
<Engine>
5. Mode
5. Press [#Enter].
SP5024
mm/inch Display
6. Press to display "Input Check".
SP5803 >>
Input Check
7. Press [#Enter].
SP5803-001
Paper Feed 1
8. Press or to select the item to check.
SP5803-013
Full Exit Tray 2
9. Press [#Enter]. Refer to the table on the next page.
Full Exit Tray 2
(7)00001010(0)
SM 5-95 G147