Ricoh G147 Service Manual page 254

Allows you to move applications from one SD card another. For more, see
"Merging Applications on One SD Card"
001 Move Exec
002 Undo Exec
Security Clear DFU
5876
This SP code clears all security data, only security data in the NCS area, or only
security data in the UCS area.
001 All Clear
011 Clear NCS Sec.
015 Clr UCS Sercurity
Option Setup
5878
Press [#Enter] to initialize the Data Overwrite Security option. For more, see "MFP
Controller Options" in Section "1. Installation".
ROM Update
5886
The setting of this SP allows or prohibits updating the ROM.
*0:YES, 1:NO
Plug/Play
5907 Selects the brand name and the production name for Windows Plug & Play. This
information is stored in the NVRAM. If the NVRAM is defective, these names
should be registered again.
MechCountDetect
5915
0: Not detected, 1: Detected, 2: Unknown
G147
Executes the move from one SD card to another.
This is an undo function. It cancels the previous execution.
Data Overwrite Security (DOS) Setup
Mechanical Counter Detection
5-64
Plug & Play Maker/Model Name
SM