Output Check - Ricoh G147 Service Manual

5.5 OUTPUT CHECK

Motors keep turning in this mode regardless of upper or lower limit sensor signals.
To prevent mechanical or electrical damage, do not keep an electrical component
on for a long time.
Enter the SP mode and select SP5804.
1. Press together (for 5 seconds), release, then press [#Enter].
System Ver.1.00
1. Service
2. Press .
System Ver. 1.00
2. Engine
3. Press [#Enter].
<Engine>
1. Feed
4. Press to display "5. Mode".
<Engine>
5. Mode
5. Press [#Enter].
SP5024
mm/inch Display
6. Press repeatedly to display "Output Check".
SP5804 >>
Output Check
7. Press [#Enter].
SP5804-001
1st.PaperFeedCl.
8. Press or to display the item to check.
SP5804-027
Fuser Exit Motor
G147 5-102 SM