Printer Controller Bit Switch Settings - Ricoh G147 Service Manual

4. Select the "0" or "1" for each position. The leftmost digit is 7 and the rightmost is
0.
Press or to move the cursor to the right or left to position the it at the digit to
change.
Press [#Enter] then press
With the digit for entry displayed on the second line, press [#Enter]. The selected
digit is entered into the position above.
Repeat this procedure to set all the digits.
5. When you are finished, press [Escape] to return to the previous level. The new
settings for the bit switch are now stored.

Printer Controller Bit Switch Settings

Position: 7 6 5
Display: 0 0 0
Bit Switch 1 Default
0 0
1 0
2 1
3 0
4 0
5 0
6 0
7 0
Bit Switch 2 All "0"
Bit Switch 3 All "0"
Bit Switch 4 All "0"
SM
or to toggle the digit between "1" and "0".
4 3 2 1
0 0 0 0
Do not change these settings.
5-3
0
0
G147