Printer Engine Service Mode - Ricoh G147 Service Manual

5.1.4 PRINTER ENGINE SERVICE MODE

The Printer Engine Service mode is used to check electrical data, change modes, and adjust
values.
Here is a quick summary of how to enter and use the Printer Engine Service mode to
change the settings listed in the Service Program Mode Tables.
1. Press and
[#Enter].
2. Press or to display "2.Engine".
3. Press [#Enter].
4. Press or to display the SP code groups.
1. Feed SP1000
2. Drum SP2000
3. Process SP3000
5. Mode SP5000
6. Periphs SP6000
7. Data Log SP7000
8. Data Log2 SP8000
9. Etc. SP9000
1. Press or to select the group, and then press [#Enter].
The 2-line display is rotational. If you press
display will jump to "9. Etc.", the last selection. Similarly, if you press
"9.Etc" displayed, the display will jump to "1.Feed", the first selection.
2. While referring to the Service Program Mode Tables, press
SP that you want to change, and then press [#Enter].
If you see > or >> to the right of a selection name, this means a menu sublevel
exists.
3. Follow one of the procedures below to change a setting.
G147
together, hold down for over 5 seconds, release and then press
with "1.Feed" displayed, the
5-4
with
or to select the
SM