Ricoh G147 Service Manual page 269

807x 2 2 Pages
807x 3 3 Pages
807x 4 4 Pages
807x 5 5 Pages
807x 6 6~10 Pages
807x 7 11~20 Pages
Interrupted jobs (paper jam, etc.) are counted, even though they do not finish.
If a job is paused and re-started, it counts as one job.
If the finisher runs out of staples during a print and staple job, then the job is counted at
the time the error occurs.
8381 T:Total PrtPGS
8384 P:Total PrtPGS
8387 O:Total PrtPGS
When the A3/DLT double count function is switched on with SP5104, 1 A3/DLT page is
counted as 2.
When several documents are merged for a print job, the number of pages stored are
counted for the application that stored them.
These counters are used primarily to calculate charges on use of the machine, so the
following pages are not counted as printed pages:
Blank pages in a duplex printing job.
Reports printed to confirm counts.
All reports done in the service mode (service summaries, engine maintenance
reports, etc.)
Test prints for machine image adjustment.
SM
807x 9 51~100 Pages
807x 10 101~300 Pages
807x 11 301~500 Pages
807x 12 501~700 Pages
807x 13 701~1000 Pages
807x 14 1001~ Pages
These SPs count the number of pages printed
by the customer. The counter for the application
used for storing the pages increments.
[0~9999999/ 0 / 1]
The L: counter counts the number of pages
stored from within the document server mode
screen at the operation panel. Pages stored
with the Store File button from within the Copy
mode screen go to the C: counter.
5-79 G147