Ricoh G147 Service Manual page 256

Adjusts the staple position in the main scan direction when using the two-tray
finisher.
Punch Pos Adj
Adjusts the punch hole position.
6113
SP6113 1: 2-hole punches for Japan, North America, Europe, and 4-hole punches
for Northern Europe.
SP6113 2: 3-hole punches for North America, and 4-hole punches for Europe.
001 2-Hole
002 3-Hole
SP7-xxx: Data Log
Main M Op Time
Display: 000 0000~999 9999 min
The number of prints and drive time for drum revolutions can be obtained by
7001
counting the main motor revolution time. If the amount of time required for the
drum to revolve to print 1 copy increases, this data combined with the number of
copies can be used to analyze problems and could be useful for future product
development.
SC Counter
7401
Displays the total number of service calls that have occurred. Display range:
0000~9999
7403 Latest10SCLog
001 Latest
002 Latest 1
003 Latest 2
004 Latest 3
G147
[–7.5~+7.5 / 0 / 0.5 mm steps]
[–7.5~+7.5 / 0 / 0.5 mm steps]
Total SC Counter
SC History (Latest 10 only)
Displays the most recent service calls successive
groups of 10.
5-66
Punch Hole Position Adjustment
Main Motor Operation Time
SM