Ricoh G147 Service Manual page 177

Boot the machine from the SD card.
HDD mail receive data error
The machine detected that the
HDD was not operating correctly
at power on.
872 B
The machine detected that the
HDD was not operating correctly
(could neither read nor write)
while processing incoming email
HDD mail send data error
An error was detected on the
HDD immediately after the
873 B
machine was turned on, or power
was turned off while the machine
used the HDD.
Delete All error 1: HDD
A data error was detected for the
HDD/NVRAM after the Delete All
874 D
option was used. The source of
this error is the Data Overwrite
Security Unit B735 running from
an SD card.
Delete All error 2: Data area
An error occurred while the
875 D
machine deleted data from the
HDD. The source of this error is
the Data Overwrite Security Unit
SM
HDD defective
Machine was turned off while the
HDD was being accessed.
Do SP5832 007 to format the mail
RX data on the HDD.
Do SP5832-007 (Format HDD –
Mail TX Data) to initialize the HDD.
Replace the HDD
Turn the main switch off/on and try
the operation again.
Install the Data Overwrite Security
Unit again. For more, see section "1.
Installation".
HDD defective
Turn the main switch off/on and try
the operation again.
4-27 G147