Ricoh G147 Service Manual page 224

002 Staple Supply Al(arm)
003 Toner Supply Ala(rm)
004 MaintenaceKit A(larm
128 Interval: Others
132 Interval: A3
133 Interval: A4
134 Interval: A5
141 Interval: B4
142 Interval: B5
160 Interval: DLT
164 Interval: LG
166 Interval: LT
172 Interval: HLT
5515 SC Call Setting Japan Only
With NRS (New Remote Service) in use, these SP codes can be set to issue an
G147
DLT, LG, LT, HLT)
0:Off 1:On
Switches the control call on/off for the stapler installed
in the finisher. DFU
0: Off, 1: On
0: No alarm
1: Alarm goes off for every 1K of staples used.
(0:Off, 1:On)
Switches the control call on/off for the toner end. DFU
0: Off, 1: On
If you select "1" the alarm will sound when the
machine detects toner end.
Switches the alarm for the maintenance kit on/off.
[*OFF, On]
The "Paper Supply Call Level: nn" SPs specify the
paper control call interval for the referenced paper
sizes. DFU
[00250 ~ 10000 / 1000 / 1 Step]
5-34 SM