Ricoh G147 Service Manual page 66

Check the accessories and their quantities against the following list:
Description
1. USB Host Interface Unit Type 7300
- Procedure -
Turn off the power switch and disconnect the power supply cord.
1. Remove the cover [1] of board Slot 1 or 2 (
2. Install the interface board [2] (
Use a screwdriver to tighten the knob-screws. Do not tighten manually,
because this can disconnect the board.
3. Reattach the application cover (
G147
Q'ty
1
x1)
x2 knob screws)
x1)
1-34 SM