Ricoh G147 Service Manual page 220

Disables and enables the toner refill display. The display appears when the
PCDU requires more toner. (Default: *Enable)
*Enable, Disable
Display IP add
Switches the banner display of the IP address off and on. (Default: *Off)
[OFF] ON
5055
For example, if this SP is switched on, the IP address will be displayed below
"Ready" while the printer is in standby mode:
Ready
169.254.187.055
Coverage Counter
5056
[0~1/0/1] 0:Not Displayed 1:Displayed
This SP switches the counter list for the system administrator on/off.
Double Count
Specifies whether the counter is doubled for A3/DLT. "Yes" counts except from
5104
the bypass tray. When "Yes" is selected, A3 and DLT paper are counted twice,
that is A4 x2 and LT x2 respectively.
PaperTypeSelect
0: Japan, 1: North America, 2: Europe
Selects the paper size (type) for paper. (Default depends on DIP SW 101
5131
setting.)
After changing the setting, turn the machine off and on. If the paper size of the
archive files stored on the HDD is different, abnormal copies could result.
5150 Bypass Length Se
Sets up the by-pass tray for long paper.
G147
Display IP Address
A3/DLT Double Count
Paper Size Type Selection
Bypass Length Setting
5-30 SM