Ricoh G147 Service Manual page 240

158 IPv6 Gateway
161 IPv6StatelessAut
Note: IPV6 Addresses
Ethernet and the Wireless LAN (802.11b) reference the IPV6 "Link-Local address + Prefix
Length". The IPV6 address consists of 128 bits divided into 8 blocks of 16 bits:
aaaa:bbbb:cccc:dddd:eeee:ffff:gggg:hhhh:
The prefix length is inserted at the 17th byte (Prefix Range: 0x0~0x80). The initial setting is
0x40(64).
For example, the data
2001123456789012abcdef012345678940h
is expressed:
2001:1234:5678:9012:abcd:ef01:2345:6789: prefixlen 64
However, the actual IPV6 address display is abbreviated according to the following rules.
- Rules for Abbreviating IPV6 Addresses -
1. The IPV6 address is expressed in hexadecimal delmited by colons (:) with the following
characters:
0123456789abcdefABCDEF
2. A colon is inserted as a delimiter every 4th hexadecimal character.
fe80:0000:0000:0000:0207:40ff:0000:340e
3. The notations can be abbreviated by elminating zeros where the MSB and digits
following the MSB are zero. The example in "2" above, then, becomes:
fe80:0:0:0207:40ff:0:340e
G147
"Manual Set Address" + "Prefix Length"
The IPv6 address consists of a total 128 bits
configured in 8 blocks of 16 bits each. These
notations can be abbreviated. See "Note: IPV6
Addresses" below this table.
This SP is the IPv6 gateway address referenced on
the Ethernet or wireless LAN (802.11b). The IPv6
address consists of a total 128 bits configured in 8
blocks of 16 bits each. These notations can be
abbreviated. See "Note: IPV6 Addresses " below this
table.
This SP allows you to confirm or set the setting for the
stateless automatic setting function used by either the
Ethernet or Wireless LAN (802.11b).
5-50 SM