Developer - Ricoh G147 Service Manual

3.8.4 DEVELOPER

1. Development unit (See 'Development Unit'.)
2. Remove the development roller (See 'Development Roller'.)
3. Tip out the old developer [A].
4. Turn drive gear [B] to ensure that no developer remains in the unit or on the
development roller.
Dispose of the used developer in accordance with local regulations. Work
carefully to avoid scratching or nicking the development roller.
5. Pour approximately 1/3 of the developer [C] evenly along the length of the
development unit.
6. Rotate the drive gear [D] to work the developer into the unit. Repeat [C] and [D]
until all toner is in the unit and level with the edges.
7. Reassemble the development unit
SM 3-25 G147