Ricoh G147 Service Manual page 55

SD card in SD card slot C1.
7. Reconnect the network cable, if the network is connected.
8. Turn the power switch on.
9. Do SP5878 and push [#Enter].
10. Go out of the SP mode and turn the power switch off.
11. Turn the machine power on with the SD card in SD card slot C1.
- Checking the Installation -
Do this procedure to confirm that the data overwrite security feature is enabled and
operating.
1. Enter the SP mode and do SP5990 005 (Diagnostic Report) to print the Diagnostic
Report.
2. Check the Diagnostic Report.
Under "[ROM No. / Firmware Version]", you should see "B7355050/0.04" displayed
for HDD Format Option.
Under "[ Loading Program ]" you should see "GW1a_zoffy: B7355050/0.04".
This completes the installation.
The Data Overwrite Security SD card must remain in SD card slot C1.
If the SD card is removed from C1 while the machine is operating, this will cause
SC867 (SD Card Removed). Insert the SD card again and cycle the machine off/on.
Detailed instructions for the operation of the Data Overwrite Security Unit are
provided on the CD-ROM provided with the SD card.
SM 1-23 G147