Ricoh G147 Service Manual page 219

No. times for 3r
This SP prescribes the number of times that the cleaning pattern of SP3905 004
is repeated for jobs that are longer than the number of pages prescribed by
SP3905 004.
005
[0~5/0/1]
Unless you change this setting, the cleaning pattern of SP3904 (1st Cleaning,
then the 2nd Cleaning after 35 sec.) is not repeated. If you change this setting to
"1" for example, then the pattern will be repeated once.
Job/HR stripper
This SP setting determines whether cleaning is canceled if another job starts
while cleaning is in progress.
006
0: New job priority (default)
1: Cleaning priority
Setting this SP to "1" ensures that every cleaning cycle executes completely
before another job is allowed to start.
SP5-xxx: Mode
5024 mm/inch Display
Selects whether mm or inches are used in the display. After selecting the
number, you must turn the power switch off and on.
Europe/Asia model: [0 = mm / 1 = inch]
American model: [0 = mm / 1 = inch]
5037 Status Lamp Mode
Determines whether the status lamp on the operation panel operates or not. If a
customer finds the flashing of this lamp disturbing, use this SP to switch it off.
[0~1/1/1]
0: Lamp operation off
1: Lamp operation on
5051 TonerRefillDisp
SM
No. of times for 3rd hot roller stripper cleaning
Job/hot roller stripper cleaning priority setting
Status Lamp Mode
Toner Refill Display
5-29 G147