Memory Clear: Sp5801 - Ricoh G147 Service Manual

5.6 MEMORY CLEAR: SP5801

Executing Memory Clear resets all the settings stored in the NVRAM to their default settings,
except the following:
SP5811-1: Machine serial number
SP5907: Plug & Play Brand Name and Production Name Setting
This procedure restores all SP code settings to their factory default settings.
Before clearing all settings in memory with SP5801, print an SMC report with
SP5990. You may need this for reference to restore previously adjusted settings.
1. Push and
[#Enter].
2. Press or to display "2.Engine".
3. Press [#Enter].
4. Press or to display "5.Mode" then press [#Enter].
5. Press or to display "SP5801/Memory Clear" then press [#Enter].
6. With "Clear All" displayed, press [#Enter], then press [#Enter] again to execute.
<All>
result=OK
Here is a summary of all the settings.
No. Item
001 All
002 Clear Engine
003 SCS
004 IMH
005 MCS
008 PRT
010 WebService
G147
together, hold down for over 5 seconds, release and then press
All items in this table
All settings set for engine and processing
System Control Service (ROM update information)
Image Memory Handler
Printer defaults
Netfile (NFA) management files, thumbnails, the Job
login ID.
What It Initializes
5-106 SM