Ricoh G147 Service Manual page 238

022 ActIPv4 SbNet
023 ActIPv4GateW
050 1284 Compatible
052 ECP
065 Job Spool
066 HD Job Clear
069 JobSpool Protocol
G147
For example, if the the setting of the the IPv4 address
is "0C0A80001h " this is displayed as
"192.169.000.001".
This SP allows you to confirm the IPv4 subnet mask
setting that was used when the machine started up
with DHCP. For example, if the setting for the IPv4
subnet mask is "FFFFFF00H" this is displayed as
"255.255.255.000"
This SP allows you to confirm the IPv4 default
gateway setting that was used when the machine
started up with DHCP. For example, if the setting for
the IPv4 gateway is "0C0A80001h" this is displayed
as "192.168.000.001".
Enables and disables bi-directional communication on
the parallel connection between the machine and a
computer.
[0~1/1]
0:Off
1: On
Disables and enables the ECP feature (1284 Mode)
for data transfer.
[0~1/1]
0: Disabled
1: Enabled
Switches job spooling spooling on and off.
0: No spooling 1: Spooling enabled
This SP determines whether the job interrupted at
power off is resumed at the next power on. This SP
operates only when SP5828 065 is set to 1.
1: Resumes printing spooled jog.
0: Clears spooled job.
This SP determines whether job spooling is enabled
5-48 SM