Ricoh G147 Service Manual page 169

motor turned on.
Finisher exit guide motor error
After the finisher exit guide motor
731 D
turned on, the exit guide sensor did
not activate within 800 ms.
Finisher upper tray shift motor error
The upper tray did not reach its home
732 D
position within 1.25 sec. after the
upper tray shift motor turned on.
Finisher lower tray lift motor error
733 D
The stack height sensor did not activate within 15 sec. after the lower tray
lift motor turned on.
Lower tray lift motor connector or harness loose, broken, defective
Lower tray lift motor defective or overloaded due to an obstruction
Upper stack height sensor connector or harness loose, broken,
defective
Upper stack height sensor defective
Lower tray lower limit sensor connector or harness loose broken,
defective
SM
defective
Stapler HP sensor defective
Finisher exit guide motor
defective harness or connector
loose, broken, defective
Finisher exit guide motor
defective
Finisher exit guide sensor
defective
Upper tray shift motor
connector or harness loose,
broken, defective
Upper tray shift motor defective
or overloaded due to an
obstruction
Upper tray shift sensor
connector or harness loose,
broken, defective
Upper tray shift sensor
defective
4-19 G147