Ricoh G147 Service Manual page 227

Performs a free run. The printer prints the number of blank prints requested for
testing.
[0 ~ 1 /0 / 1 step]
0:Free run mode off.
1:Free run mode on.
Input Check
5803
Displays the signals received from sensors and switches. (See "Input Check")
Output Check
5804
Turns on the electrical components individually for test purposes. (See "Output
Check")
5807 Option Connect Chk
002 Bank (Paper Tray Unit)
003 LCT
004 Fin (Finisher)
5811 MachineNo. Setting
This SP presents the screen used to enter the 11-digit number of the machine.
The allowed entries are "A" to "Z" and "0" to "9". The setting is done at the factory,
and should not be changed in the field.
001 Code Set
003 ID2 Code Display
5812 Tel. No. Setting
001 Service
SM
Option Connection Check
Execution will return either a "1" or "0":
0: Device not connected correctly.
1: Device connected correctly.
Machine Number Code Setting DFU
Inputs the telephone number of the CE (displayed when a
service call condition occurs.)
5-37 G147