Ricoh G147 Service Manual page 248

Save to SD
006
Specifies the decimal key number of the log to be written to the SD Card.
Copy HDD to SD (4 MB)
Takes the most recent 4 MB of the log written to the hard disk and copies them
to the SD Card.
009
A unique file name is generated to avoid overwriting existing file names on the
SD Card. Up to 4MB can be copied to an SD Card. 4 MB segments can be
copied one by one to each SD Card.
Copy HDD to SD (Any)
Takes the log of the specified key from the log on the hard disk and copies it to
the SD Card.
010
A unique file name is generated to avoid overwriting existing file names on the
SD Card. Up to 4 MB can be copied to an SD Card. 4 MB segments can be
copied one by one to each SD Card. This SP does not execute if there is no log
on the HDD with no key specified.
Erase HDD Log
011
Erases all debug logs on the HDD
Erase SD Log
Erases all debug logs on the SD Card. If the card contains only debugging files
012
generated by an event specified by SP5858, the files are erased when SP5857
010 or 011 is executed.
To enable this SP, the machine must be cycled off and on.
FreeSpaceonSD
013
Displays the amount of space available on the SD card.
Copy SD to SD (4MB)
014
Copies the last 4MB of the log (written directly to the card from shared memory)
onto an SD card.
G147
Erase Debug Data Log on HDD
Erase Debug Data Log on SD Card
Display Amount of Free Space on SD
Card
5-58 SM