Ricoh G147 Service Manual page 65

1. Remove the cover [1] of board Slot 1 or 2 (
2. Attach the interface board [2] to the controller board (
Use a screwdriver to tighten the knob-screws. Do not tighten manually,
because this can disconnect the board.
3. With the printed side facing the front of the machine, insert the interface card [3]
board.
4. Attach the antenna cap [4].
- SP Mode Settings for IEEE 802.11b Wireless LAN -
The following SP commands and UP modes can be set for IEEE 802.11b
SP No. Name
5840 006 Channel MAX
5840 007 Channel MIN
5840 011 WEP Key Select
USB Host Interface Unit Type 7300 (G819)
- Accessories -
SM
x1)
Function
Sets the maximum range of the channel settings for the
country.
Sets the minimum range of the channels settings allowed
for your country.
Used to select the WEP key (Default: 00).
1-33
x1 knob screw).
G147