Ricoh G147 Service Manual page 222

Digits
1st, 2nd
3rd
4th
5th, 6th
7th
8th
001 Setting
Rule Set
002
(Start)
Rule Set
004
(End)
UCodeCtrClr
5404
Clears the counts for the user codes assigned by the key operator to restrict the
use of the machine. Press [#Enter] to clear.
5501 PM Alarm
001 PM Alarm Level
G147
Meaning
Month. 4: April, 10: October (for months 1 to 9, the first digit of 0
cannot be input, so the eight-digit setting for 002 or 003 becomes
a seven-digit setting)
Day of the week. 0: Sunday, 1: Monday
The number of the week for the day selected at the 3rd digit. If "0"
is selected for "Sunday", for example, and the selected Sunday is
the start of the 2nd week, then input a "2" for this digit.
The time when the change occurs (24-hour as hex code).
Example: 00:00 (Midnight) = 00, 01:00 (1 a.m.) = 01, and so on.
The number of hours to change the time. 1 hour: 1
If the time change is not a whole number (1.5 hours for example),
digit 8should be 3 (30 minutes).
Enables/disables the settings for 002 and 003.
[0~1/1]
0: Disable
1: Enable
The start of summer time.
The end of summer time.
[0~9999 / 0 / 1 step]
5-32
User Code Count Clear
SM