Ricoh G147 Service Manual page 47

4. Install the left joint bracket [4] ( x 2, M4 x 12) and right joint bracket [5] ( x 2, M4
x 12).
5. Attach the ground plate [6] ( x 1, M4 x 12) to the center of the paper tray unit as
shown.
6. Open the front door of the finisher, and pull out the locking lever [7] (
7. Push the finisher to the side of the machine with the holes in the finisher aligned
with the joint brackets, and then dock the finisher against the machine.
8. Push in the locking lever [7] and secure it (
SM
x 1), then close the front door.
1-15
x 1).
G147