Ricoh G147 Service Manual page 243

[0x0000~0xFFFF/1] DFU
DevReleaseNum
Sets the device release number of the BCD (binary coded decimal) display.
004
[0000~9999/1] DFU
Enter as a decimal number. NCS converts the number to hexadecimal number
recognized as the BCD.
Delivery Srv
5845
These are delivery server settings.
Retry Interval
003 Sets the time interval before the machine tries again when it goes back to standby
after an error occurs during an image transfer with the SMTP server.
[60~900/1]
No. of Retries
004 Sets the number of times the machine tries again before it returns to standby after
an error occurs during an image transfer with the delivery or SMTP server.
[0~99/1]
5846 UCS Setting
Init All Set&Dir
The SP clears all the setting information managed in UCS and address book
information (local, delivery, LDAP) and restores these settings to their default
values. Use this SP to initial the account information (user codes and passwords)
for system managers and users as well.
046
Note:
Be sure to cycle the machine off and on after you execute this SP code.
Once this SP has been executed, a message on the screens of applications
that use the address book will prompt users that the address book is being
updated. This prevents the machine from issuing SC870.
The machine initializes to determine if the address book is stored on the HDD
SM
Device Release Number
Delivery Server
Initialize Address Book Seting and Directories
5-53 G147