Ricoh G147 Service Manual page 297

No. Item
011 NCS
014 DCS Setting
Clean UCS
015
Settings
016 MIRS Settings
017 CCS
018 SRM
019 LCS
7. After clearing all settings, make sure that you do the following:
Do the laser beam pitch adjustment (SP2109). See Section 3 "Laser Beam Pitch
Adjustment".
Referring to the SMC Report, re-enter any values, which had been changed from
their factory settings.
Execute SP3001-2 (ID Sensor Initial Setting).
SM
What It Initializes
Network Control Service. IP addresses,
SmartNetMonitor for Admin., Web Status Monitor
settings, TELNET settings
DCS (Delivery Control Service) settings
User Information Control Service) settings
Machine Information Report Service settings
Certification and Charge-control Service settings.
System Resource Management settings
Log Count Service settings
5-107 G147