Ricoh G147 Service Manual page 263

- 151 PS
- 152 RPDL
- 153 R98
SP8XXX: Data Log 2
The SPs in this group are prefixed with a letter that indicates the mode of operation. The
mode of operation is referred to as an 'application'. Before reading the Group 8 Service
Table, make sure that you understand what these prefixes mean.
Prefix Application
T: Total:
P: Print.
L: Local
O: Other
Group 8 SP codes are limited to 17 characters, forced by the necessity of displaying them
on the small LCDs of printers and faxes that also use these SPs. Read over the list of
abbreviations below and refer to it again if you see the name of an SP that you do not
understand.
This is a complete list of abbreviations applies to all machines, including color
copiers and printers. Therefore, not all of them are used in this manual.
Key for Abbreviations
SM
163
180
181
Grand total of the items counted for all applications (C, F, P, etc.).
Totals (pages, jobs, etc.) executed for each application when the
job was not stored on the document server.
Local storage (document server). Totals (jobs, pages, etc.) for
the document server. The L: counters work differently case by
case. Sometimes, they count jobs/pages stored on the document
server; this can be in document server mode (from the document
server window), or from another mode, such as from a printer
driver. Sometimes, they include occasions when the user uses a
file that is already on the document server. Each counter will be
discussed case by case.
Other applications (external network applications, etc.). Refers to
network applications such as Web Image Monitor. Utilities
developed with the SDK (Software Development Kit) are also
counted.
5-73
BMLinks 214
FONT 215
FONT1 -
What It Means
SDK2
SDK3
-
G147