Ricoh G147 Service Manual page 237

on.
5828 Network
This machine supports both Internet Protocols IPv4 and IPv6. IPv6 is the next
generation protocol designed by the IETF to replace IPV4. IPv6 adds many
improvements such as routing and network auto-configuration.
001 IPv4 Address
002 IPv4 Subnet Mask
003 IPv4 DefaultGate
006 DHCP
021 ActIPv4Add
SM
This SP allows you to confirm and reset the IPv4
address for Ethernet and a wireless LAN (802.11b):
aaa.bbb.ccc.ddd
For example, if the 8-bit entry is "192.168.000.001"
this is read "0C0A80001h"
This SP allows you to confirm and reset the IPv4
subnet mask for Ethernet and a wireless LAN
(802.11b):
aaa.bbb.ccc.ddd
For example, if the 8-bit entry is "255.255.255.00" this
is read "FFFFFF00h".
This SP allows you to confirm and reset the IPv4
default gateway used by the network for Ethernet and
wireless LAN (802.11b):
aaa.bbb.ccc.ddd
For example, if the 8-bit entry is "192.169.000.001"
this is read "0C0A80001h"
This SP code allows you confirm and change the
setting that determines whether the IP address is
used with DHCP on an Ethernet or wireless (802.11b)
LAN network.
[0~1/1/0]
0: Not used (manual setting)
1: Used
This SP allows you to confirm the IPv4 address that
was used when the machine started up with DHCP.
5-47 G147