Alcatel-Lucent 1665 Installation Manual page 82

Equipment and cable installation
............................................................................................................................................................................................................................................................
Figure 1-17 12-DS3/TMUX cable routing
Note:
used for cable routing reference only.
........................................................................................................................................................................................................................
4
Route the cables along the cable rack and into the terminating bay (DSX or other
terminating transmission equipment).
........................................................................................................................................................................................................................
5
Cut the cables to desired length and install the BNC connectors shipped with the cable
assemblies.
Note:
carefully to ensure a proper connection. Failure to do so may result in faulty DS3
signals as a result of improperly installed BNC connectors.
........................................................................................................................................................................................................................
6
Connect the cables to their respective positions on the terminating equipment.
........................................................................................................................................................................................................................
7
Verify DS3 cabling using the LNW74 TESTPK or equivalent method.
............................................................................................................................................................................................................................................................
1 - 5 4
TMUX
Cables
The shelf depicted above is a Alcatel-Lucent 1665 DMX standard shelf and is
When installing BNC connectors, follow the manufacturer's instruction
12-DS3/EC1 and TMUX (LNW16 LNW18) cable installation
365-372-304R7.1
Issue 2 March 2008