Alcatel-Lucent 1665 Installation Manual page 188

Installation tests
............................................................................................................................................................................................................................................................
Quantity
1
1
2
1
............................................................................................................................................................................................................................................................
4 - 4
Description
Personal Computer (PC)
CIT Interface Cable
LAN 10BaseT Straight-
through Cable CAT 5 or better
LAN 10BaseT Cross-over
Cable CAT 5 or better
Comments
Required to run the WaveStar
See Chapter 3, "Software download and circuit
pack installation", PC minimum requirements
(p. 3-2).
8-ft. long RJ45 to 9-pin D-sub serial cable
(Comcode 848748869). Required to connect the
PC to the CIT jack on the front of the SYSCTL
circuit pack.
As required to reach from front of Alcatel-
Lucent 1665 DMX to the RJ45 patch panel
As required to reach from front of Alcatel-
Lucent 1665 DMX to the PC
®
CIT software.
365-372-304R7.1
Issue 2 March 2008